Wuxi MitraStar Technology Co. Ltd DSL100HNUT1V3 ユーザーズマニュアル
Chapter 8 Static Route
108
8.2 Configuring Static Route
Use this screen to view and configure IP static routes on the Device. Click Network Setting > Static
Route to open the following screen.
Figure 70 Network Setting > Static Route
The following table describes the labels in this screen.
Table 34 Network Setting > Static Route
LABEL
DESCRIPTION
Add New
Static Route
Click this to set up a new static route on the Device.
#
This is the number of an individual static route.
Destination IP
This parameter specifies the IP network address of the final destination. Routing is always
based on network number.
Gateway
This is the IP address of the gateway. The gateway is a router or switch on the same
network segment as the device's LAN or WAN port. The gateway helps forward packets to
their destinations.
Subnet Mask
This parameter specifies the IP network subnet mask of the final destination.
Interface
This is the WAN interface through which the traffic is routed.
Metric
This is the “cost” of transmission for routing purposes.
Modify
Click the Edit icon to go to the screen where you can set up a static route on the Device.
Click the Delete icon to remove a static route from the Device.
Click the Delete icon to remove a static route from the Device.