Wuxi MitraStar Technology Co. Ltd DSL100HNUT1V3 User Manual
Chapter 6 Wireless
58
Click Network Settings > Wireless to display the General screen. Select More Secure as the
security level. Then select WPA2 from the Security Mode list.
Figure 30 Wireless > General: More Secure: WPA2
The following table describes the labels in this screen.
Table 13 Wireless > General: More Secure: WPA2
LABEL
DESCRIPTION
Security Level
Select More Secure to enable WPA2 data encryption.
Security Mode
Choose WPA2 from the drop-down list box.
Authentication Server
IP Address
Enter the IP address of the external authentication server in dotted decimal notation.
Port Number
Enter the port number of the external authentication server. The default port number
is 1812.
You need not change this value unless your network administrator instructs you to do
You need not change this value unless your network administrator instructs you to do
so with additional information.
Shared Secret
Enter a password (up to 128 alphanumeric characters) as the key to be shared between
the external authentication server and the Device.
The key must be the same on the external authentication server and your Device. The
The key must be the same on the external authentication server and your Device. The
key is not sent over the network.
more.../hide more
Click more... to show more fields in this section. Click hide more to hide them.