Wuxi MitraStar Technology Co. Ltd DSL100HNUT1V3 User Manual

Chapter 6    Wireless

59

The Device can broadcast up to four wireless network names at the same time. This means that 

users can connect to the Device using different SSIDs. You can secure the connection on each SSID 

profile so that wireless clients connecting to the Device using different SSIDs cannot communicate 

with each other.

This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the Device.

Click Network Settings > Wireless > More AP. The following screen displays.

Figure 31 Network Settings > Wireless > More AP

ReAuthentication 

Timer

Specify how often wireless stations have to resend user names and passwords in order 

to stay connected.
The default value is 0, which means the reauthentication off.

Note: If wireless station authentication is done using a RADIUS server, the 

reauthentication timer on the RADIUS server has priority.

WPA Compatible

Select this if you want the Device to support WPA and WPA2 simultaneously.

Group Key Update 

Timer

The Group Key Update Timer is the rate at which the RADIUS server sends a new 

group key out to all clients. 
If the value is set to “0”, the update timer function is disabled.

Encryption

If the security mode is WPA2 and WPA-PSK Compatible is disabled, the encryption 

mode is set to AES to enable Advanced Encryption System (AES) security on your 

wireless network. AES provides superior security to TKIP.
If the security mode is WPA2 and WPA-PSK Compatible is enabled, the encryption 

mode also allows you to select TKIPAES MIX to allow both TKIP and AES types of 

security in your wireless network.

Table 13   Wireless > General: More Secure: WPA2 (continued)