Duravit AG 596000098001 User Manual
23
Detergent should NOT be left in any gaps after cleaning.
Note!
Yellow discoloration due to incorrect cleaner
> Do not use abrasive cleaning agents or cleaning agents containing chlorine or acid.
> Only use cleaning agents and equipment which is intended for this area of application.
> Follow the instructions of the cleaning agent manufacturer.
Neutral soap or a mild commercially-available detergent is suitable for daily cleaning.
Damage to surface due to incorrect cleaning
> Do not use a dry cloth or dry paper to clean the plastic parts. Using dry paper or dry cloth may degrade
the antibacterial coating on the plastic parts and scratch the surface.
> Only use soft damp cloth or sponge to clean the plastic parts.
Clean the seat unit regularly, or immediately if it is soiled. If the cleaning is not carried out regularly enough,
soiling may become visible which can lead to stubborn dirt.
> Clean the toilet seat and lid with warm water and a cleaning agent.
> Wipe slightly damp afterwards.
> Leave the toilet seat up while the toilet contains powerful cleaning agent.
> In case of excessive dirt, use a soft damp cloth wet with water and a thin neutral detergent to clean, and
then use a soft damp cloth wet with water only to remove the detergent.
> If detergent adheres to the product, use a soft damp cloth wet with water to wipe it off.
Manual cleaning of the spray wand and nozzle
Manual cleaning is only possible if the seat sensor is not activated.
Clean the spray wand and nozzle regularly, or immediately if they are soiled.
Note!
Yellow discoloration due to incorrect cleaner
> Do not use abrasive cleaning agents or cleaning agents containing chlorine or acid.
> Only use cleaning agents and equipment which is intended for this area of application.
> Follow the instructions of the cleaning agent manufacturer.
Neutral soap or a mild commercially-available detergent is suitable for daily cleaning.
Damage to surface due to incorrect cleaning
> Do not use a dry cloth or dry paper to clean the plastic parts. Using dry paper or dry cloth may degrade
the antibacterial coating on the plastic parts and scratch the surface.
> Only use soft damp cloth or sponge to clean the plastic parts.
Clean the seat unit regularly, or immediately if it is soiled. If the cleaning is not carried out regularly enough,
soiling may become visible which can lead to stubborn dirt.
> Clean the toilet seat and lid with warm water and a cleaning agent.
> Wipe slightly damp afterwards.
> Leave the toilet seat up while the toilet contains powerful cleaning agent.
> In case of excessive dirt, use a soft damp cloth wet with water and a thin neutral detergent to clean, and
then use a soft damp cloth wet with water only to remove the detergent.
> If detergent adheres to the product, use a soft damp cloth wet with water to wipe it off.
Manual cleaning of the spray wand and nozzle
Manual cleaning is only possible if the seat sensor is not activated.
Clean the spray wand and nozzle regularly, or immediately if they are soiled.
> Press the „Stop“ button
and hold this pressed. Now press the „Rearwash“ button
on the
remote control.
The spray wand extends.
> Clean the spray wand and nozzle with a soft cloth, soft sponge or a small brush and mild cleaning agent.
The spray wand extends.
> Clean the spray wand and nozzle with a soft cloth, soft sponge or a small brush and mild cleaning agent.
>Press the „Stop“ button
again.
The spray wand retracts.
Alternatively:
Alternatively:
> Press the „Rearwash“ button
on the seat unit.
The spray wand extends.
> Clean the spray wand, use a soft cloth, soft sponge or a small brush and a mild cleaning agent.
> Clean the spray wand, use a soft cloth, soft sponge or a small brush and a mild cleaning agent.
> Press the „Rearwash“ button
on the seat unit again or
press the „Stop“ button
on the remote
control.
The current function stops immediately.