Duravit AG 596000098001 User Manual

The spray wand retracts automatically after 3 minutes or when the seat sensor is activated.

Self-cleaning of the spray wand
Clean the spray wand regularly, or immediately if it is soiled.
> Press the „Stop“ button

and hold this pressed. Now press the ”Comfortwash“ button

on the

remote control.
The spray wand cleans itself.
The spray wand is flushed with water in the concealed position.

> Press the „Stop“ button

again.

The current function stops immediately.

Alternatively:

> Press the „Ladywash“ button

on the seat unit.

The spray wand cleans itself.
The spray wand is flushed with water in the concealed position.

> Press the „Ladywash“ button

on the seat unit again or

press the „Stop“ button

on the

remote control.

The current function stops immediately.

8.2 Ceramic

Note!
Damage to surface due to incorrect cleaning!
• Only use suitable cleaners and equipment.
• Follow the manufacturer‘s instructions for the cleaner.
• Never mix cleaners.

A mild commercially available sanitary cleaner is suitable for daily cleaning; limescale stains can be
removed using an acidic vinegar or citrus based cleaner (pH value
1-4). The harder the water is, the greater the quantity of cleaner should be used.
Metallic marks resulting from use (black dots/lines, e.g. due to rubbing of rings) cannot be removed using
mild cleaners. Only treat the affected area with stainless steel cleaner, car polish or a ceramic hob cleaner.

Clean the coated surface regularly, or immediately if it is soiled. If the cleaning is not carried out regularly
enough, soiling, e.g. limescale and soap stains, cosmetic residues, rust and mould, may become visible
and subsequently more difficult to remove.
> Clean the surface with a soft cleaning cloth and warm water.
> When tackling stubborn dirt, wait a few minutes to allow the cleaner to take effect.
Tip! An advantage of using gels and foaming cleaners is that they also adhere well to sloping surfaces. You