Schneider Electric Industries SAS 01-EM43 User Manual
7EN02-0356-00
13
EM4300 series user manual
Chapter 3 - Commissioning
Safety precautions
Installation, wiring, testing and service must be performed in accordance with all local
and national electrical codes.
and national electrical codes.
1. Turn off all power supplying this device and the equipment in which it is installed
before working on it.
2. Always use a properly rated voltage sensing device to confirm that all power is off.
Meter mounting
***MAKE REFERENCE TO INSTALL SHEET HERE, THEN PROVIDE MORE
DETAILS HERE TO EXPLAIN THE GRAPHICS***
DETAILS HERE TO EXPLAIN THE GRAPHICS***
The meter can be mounted on a flat surface or a TS35 Top-Hat style DIN rail.
Flat surface mounting
Use M4 screws to mount the meter to a flat solid surface.
**ADD GRAPHIC HERE**
Installation considerations
Certain installation locations or scenarios should be avoided.
**ADD GRAPHICS FROM WILEM USERGUIDE HERE SPECIFICALLY ONES FROM
SECTION 3.3**
SECTION 3.3**
•
Do not install in a location that directly blocks the antenna
DIN rail mounting
1. Line up the meter to the DIN rail. Tilt the meter slightly so the top notch is resting
securely on the DIN rail.
**ADD GRAPHIC HERE**
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
• Apply appropriate personal protective equipment (PPE) and follow safe
electrical work practices. See NFPA 70E in the USA or applicable local
standards.
standards.
• Turn off all power supplying this device and the equipment in which it is
installed before working on it.
• Always use a properly rated voltage sensing device to confirm that all
power is off.
• Do not exceed the device’s ratings for maximum limits.
• Always use grounded external CTs for current inputs.
Failure to follow these instructions will result in death or serious injury.
DRAFT
COPY
ONLY
FOR
UL