RV LIGHTING INC. MODEL-NO-WS-01 User Manual

Page of 3
2
     Thank you for purchasing our product. R217 series LED 
dimmer is designed to drive constant voltage LED products in 
voltage range of DC5V-24V. It contains a main control unit and a 
RF wireless remote controller. User can turn on/off or adjust 
LED brightness conveniently via the remote controller.
5. Power Supply
The controller unit can work from DC 5V to 24V. The red 
power cable should be connected to power positive and black 
to negative. P
lease make sure the power supply voltage is 
same as the LED load and the power is capable for the load 
wattage.
LED Dimmer
User’s Manual
R217 / R217-S
RF Remote Operation
Full Protection
Multi Remote Option
Waterproof Option
Easy Remote Pairing
Compact Design
Introduction
Installing
6. LED Output
    The controller unit supports constant voltage driving LED 
products. The red cable should be connected to LED positive 
and black cable to negative. The red cable is internal 
connected to power supply positive in controller unit.
     The controller unit has output overload protection 
function, please check whether the output is short circuit or 
over loaded if the controller stop working.
1
2
Functions
1. Turn on/off 
Press this key to switch on or off the controller. Press and hold 
this key will force to switch off the controller.  The controller will 
memorize the on/off status and restore the on/off status and 
brightness level on each power on moment.
2. Increase Brightness
Press this key to increase the output LED brightness. Press and 
hold this key will continuously increase the brightness.
4. Remote Controller Indicator
This indicator will blink when remote controller works. 
Single Color
Smooth Change Effect
7. Status Indicator
This is a full color status indicator. It displays all working status 
of the controller. It indicates different events as following:
Blue: normal working.
Short single white flash: new command received.
Long single yellow flash: reach brightness limit.
Red flash: overload protected.
Yellow flash: overheat protected.
Operation
5
6
7
3
RM07 (Optional)
1
2
3
4
4
3. Decrease Brightness
Press this key to decrease the output LED brightness. Press 
and hold this key will continuously decrease the brightness. 
When controller is off, hold press this key will turn on the 
controller and jump to minimum brightness.