Olympus Winter & Ibe GmbH ESG200 User Manual

67

Inspection before operation

Any irregularity or damage of the electrosurgical generator and its equipment compromises 

the safety and can result in injury to the patient, the user and the medical personnel.

 

• Prior to every operation, inspect the electrosurgical generator as described in this chapter.

 

• Prior to every operation, inspect all equipment for irregularity or damage.

 

• Do not use the electrosurgical generator if any irregularity or damage is suspected.

 

• Do not use the equipment if any irregularity or damage is suspected.

 

• Refer to the chapter “Troubleshooting” on page 78.

To test the power connection of the electrosurgical generator proceed as follows:

1.  Switch on the electrosurgical generator.

2.  Check that the power switch lights up.

3.  Check that the touch screen lights up.

The start screen with the Olympus logo is displayed shortly and the start melody is 

played.

4.  Check that the All Screen is displayed after the start screen.

The All Screen recalls the last settings of all output sockets.

Wrong operation of the touch screen can cause malfunction or damage to the touch screen.

 

• Only tap one button or pane at a time.

 

• Only tap the touch screen from the front. Avoid oblique angles when tapping the touch 

screen.

 

• Do not use pointed objects, e.g. a pen, to tap the touch screen.

 

• Do not tap the touch screen unintentionally.

 

• Do not apply excessive loads on the surface of the touch screen.

 

• Remove dust and dirt by wiping the touch screen with a cloth.

DRAFT 

– 

2017-01-17