Olympus Winter & Ibe GmbH ESG200 User Manual

65

 Output settings

 - The energy counter shows the total amount of energy emitted in kilojoules in the following 

formats:

 - [0.00 kJ] for up to 9.99 kJ

 - [00.0 kJ] for up to 99.9 kJ

 - [000 kJ ] for up to 999 kJ

 - When exceeding an energy amount of 999 kJ the electrosurgical generator continues to 

count in Megajoules (MJ).

 

• To reset the counters to 0 either switch off the electrosurgical generator or tap [Reset] on 

the Set Screen.

To avoid patient injury and damage of bipolar RFITT applicators by unintended activation of 

bipolar cutting, no bipolar cutting mode can be activated while a RFITT mode is selected. If 

the yellow cut pedal is pressed by mistake then the following error message is displayed:

The electrosurgical generator recognizes the CELON bipolar applicator that is connected. 

This means:

 - The name of the connected CELON bipolar applicator is displayed in the BIPOLAR pane 

of the touch screen, e. g. [ProBreath].

 - Only compatible modes and output power settings are available.

DRAFT 

– 

2017-01-17