InVue F1703A User Manual
Series 2800
Custom S-Pen Charger
Vertical Recoiler
DNAZ72
Custom S-Pen Charger
Vertical Recoiler
DNAZ72
5
Pull the sylus clip from the recoiler.
Place the recoiler in the desired
location and apply pressure for at 10
least seconds.
location and apply pressure for at 10
least seconds.
4
3
Peel the liners from the adhesives on
the bottom of the recoiler.
the bottom of the recoiler.
1
Clean the fixture with the provided
alcohol wipe. Let it dry completely.
alcohol wipe. Let it dry completely.
6
Remove the pin cover from the fob
tool.
tool.
2
Optional:
If desired, route the cable through a
hole or slot in the fixture.
If desired, route the cable through a
hole or slot in the fixture.
7a
Insert the pin into the hole opposite
of the cable.
of the cable.