InVue F1703A User Manual

Remove the sleeve and separate the 
upper and lower halves of the stylus 
clip.

With the S-Pen clicked open, place 
it into the cavity of the bottom clam 
shell piece. The button on the S-Pen 
should face upwards.

Place the top half of the clam shell 
over the S-Pen.

Orient the sleeve cover so that the 
gap will align with the cable. Slide 
the sleeve up the length of the S-Pen 
and over the the 2 pieces of the 
stylus clip.

Insert the retainer into the hole on the 
outer sleeve and through the bottom 
piece of the clip. It should sit flush 
when properly assembled.

Insert the S-Pen into the hole in the 
top of the recoiler to display.

Prepare the stylus for installation 
into the clip by making sure that it is 
clicked open.

Pivot the fob tool back to remove the 
retainer.