Shenzhen Ejeas Technology Co. Ltd. TTS User Manual
1.In the off state, long press on / off key about 2S, the blue light on the
right, the headset tip "power on”
2.In the boot state, at the same time, press the on / off key and volume
up key about 0.2S, the right side of the red LED light, the headset tip “
power off” Or long press on / off 8s, the right side of the red LED light,
the headset tip “ power off”
right, the headset tip "power on”
2.In the boot state, at the same time, press the on / off key and volume
up key about 0.2S, the right side of the red LED light, the headset tip “
power off” Or long press on / off 8s, the right side of the red LED light,
the headset tip “ power off”
1.You can use the package containing the Micro USB line charging, charging
Bluetooth intercom indicator red LED flashing, charging, Bluetooth intercom
indicating red LED flash, before each use recommended to charging full the
battery.
2.Power shortage tip: every 30s, the headset will automatically voice prompt
Battery low , while the right side of the red LED flashes 3 times, to prompt the
user to charge.
3.In the starting state can be a double click on the open/shut down button
to check the battery current battery, Battery power to the sound to listen to the
speaker.
Bluetooth intercom indicator red LED flashing, charging, Bluetooth intercom
indicating red LED flash, before each use recommended to charging full the
battery.
2.Power shortage tip: every 30s, the headset will automatically voice prompt
Battery low , while the right side of the red LED flashes 3 times, to prompt the
user to charge.
3.In the starting state can be a double click on the open/shut down button
to check the battery current battery, Battery power to the sound to listen to the
speaker.
1.Answer incoming calls, call when the phone key to answer calls.
2.Automatic answering calls, when set to automatically answer the phone,
the caller is more than about 6S did not click the phone key to answer the
phone, the phone will automatically answer the phone calls.
3.Hang up the phone, when you calling, Press on the phone key to
hang up the phone.
4.Caller reject,double press phone key to reject calls.
5.Voice dialing, connecting the phone standby mode, double Press the
volume key to achieve voice dialing. (the Mobile phone itself must be
equipped with voice dialing function).
6.End number redial , connected mobile phone standby, double-press the
volume up key
7.Connected with the Mobile phone, the Mobile phone is not connected to
the state, you can press the phone key , Headphones from
reconnect has been connected to the Mobile phone.。
8.Connected to third party calls, when the connection two phone, the first
mobile phone in the call, the second mobile phone calls, you can
double-Press the phone key to connect second mobile phone, to
retain the first phone calls, to be back to the first second mobile phone calls.
2.Automatic answering calls, when set to automatically answer the phone,
the caller is more than about 6S did not click the phone key to answer the
phone, the phone will automatically answer the phone calls.
3.Hang up the phone, when you calling, Press on the phone key to
hang up the phone.
4.Caller reject,double press phone key to reject calls.
5.Voice dialing, connecting the phone standby mode, double Press the
volume key to achieve voice dialing. (the Mobile phone itself must be
equipped with voice dialing function).
6.End number redial , connected mobile phone standby, double-press the
volume up key
7.Connected with the Mobile phone, the Mobile phone is not connected to
the state, you can press the phone key , Headphones from
reconnect has been connected to the Mobile phone.。
8.Connected to third party calls, when the connection two phone, the first
mobile phone in the call, the second mobile phone calls, you can
double-Press the phone key to connect second mobile phone, to
retain the first phone calls, to be back to the first second mobile phone calls.
2
1
TTS
FCC ID:2AIEBTTS
Multiplex Helmet Bluetooth Headset
www.motointerphone.com
User’s Guide
4
5
6
3
7
On / off key
1.On / off
2.Paired Mobile Phone
3.Power Tips
4.Hang up the Bluetooth Intercom
2.Paired Mobile Phone
3.Power Tips
4.Hang up the Bluetooth Intercom
Mobile Phone Key
1.Music play/pause
2.Call answering / third party call answer / end call / reject call
Bluetooth Intercom Key
1.Music play/pause
2.Call answering / third party call answer / end call / reject call
Bluetooth Intercom Key
1.Paired Bluetooth intercom
2.Connect Bluetooth intercom
FM Radio Key
2.Connect Bluetooth intercom
FM Radio Key
1.Open/Exit FM Radio
Volume Up Key
Volume Up Key
1.Volume Up
2.last song
3.FM Radio Search Up
4.Last Number Redial
Volume Down Key
2.last song
3.FM Radio Search Up
4.Last Number Redial
Volume Down Key
1.Volume Down
2.Next Song
3.FM Radio Search Down
4.Voice Dialing
2.Next Song
3.FM Radio Search Down
4.Voice Dialing
1、MODI-T8S Key Function Description
2、 LED Status Indicator
3、Charging
LED Status Indicator
Blue LED Flash(once)：
Blue LED Flash(once)：
Bluetooth is not connected
Red LED Blue LED Alternating Flash (slow ) Bluetooth By Pairing Mode
Red LED Blue LED Alternating Flash(fast) Bluetooth is in active pairing
search mode
Blue LED flash two times： Bluetooth has been connected
Red LED slow flash： Charging
Red LED Long time light： Charging finish
Red LED flash three times： Battery low warning
Red LED Blue LED Alternating Flash(fast) Bluetooth is in active pairing
search mode
Blue LED flash two times： Bluetooth has been connected
Red LED slow flash： Charging
Red LED Long time light： Charging finish
Red LED flash three times： Battery low warning
Vol-
Vol+
Phone Key
Walkie-talkie
interface
interface
Headset interface
Intercom Key
Intercom LED
Phpne LED
FM Power On/Off
4.
ON/ OFF
5.
Pairing mobile phones using
7. Walkie-talkie use method
8.FM radio
9.Front and rear seat music sharing function
10.Technical index
6.Bluetooth intercom
Mobile pairing
1.TTS long press on / off at about 8s, the lef red LED&blue LED
lights flashing alternately, the headset tips "pairing". Turn on the phone,
search TTS ', and then click on the phone to connect to the phone.
After the end of the match, the mobile phone indicator light back to the
standby mode, blue lights flash 2 times.
search TTS ', and then click on the phone to connect to the phone.
After the end of the match, the mobile phone indicator light back to the
standby mode, blue lights flash 2 times.
Mobile Phone calls to answer or dial
Bluetooth intercom paired
1.Plug theWalkie-talkie link line into the TTS Walkie-talkie interface, when
the headset is properly connected to the headset when the headset is ready to
listen to the voice of the other Walkie-talkie, You can listen to the sound of the
other Walkie-talkie,There are other sound signals come in(such as: mobile phone,
Bluetooth intercom, music, FM radio) sound signal will mix, you can hear these
sounds at the same time.
2.Walkie-talkie Microphone transmit ：
Press the intercom connecting line of the PTT button, you can use the headset
microphone to the speaker, release the PTT button, if you end the intercom
speaker, in mobile phone headset / Bluetooth intercom / Music Player state, then
hold down the PTT speaker, on behalf of all the party people to hear your speech
3.Walkie-talkie volume adjustment method, when the headset is in charge to
use the walkie talkie words, because TTS headset are different and have
different volume, so suggest you in connecton with Walkie-talkie, TTS no
other voice input, the intercom itself volume to the appropriate size, in order to
adapt to the different state of the headset volume.
the headset is properly connected to the headset when the headset is ready to
listen to the voice of the other Walkie-talkie, You can listen to the sound of the
other Walkie-talkie,There are other sound signals come in(such as: mobile phone,
Bluetooth intercom, music, FM radio) sound signal will mix, you can hear these
sounds at the same time.
2.Walkie-talkie Microphone transmit ：
Press the intercom connecting line of the PTT button, you can use the headset
microphone to the speaker, release the PTT button, if you end the intercom
speaker, in mobile phone headset / Bluetooth intercom / Music Player state, then
hold down the PTT speaker, on behalf of all the party people to hear your speech
3.Walkie-talkie volume adjustment method, when the headset is in charge to
use the walkie talkie words, because TTS headset are different and have
different volume, so suggest you in connecton with Walkie-talkie, TTS no
other voice input, the intercom itself volume to the appropriate size, in order to
adapt to the different state of the headset volume.
1.Standby mode, press FM key to turn on the radio,press again Press FM
key to turn off the radio.
2.The radio to search up：In the course of using the radio，double press
volume up key ， search up.
3.The radio to search down：In the course of using the radio，double press
volume dow key ， search down.
4.FM radio volume adjustment method,short press the volume up key
the up volume, short press the volume down key to the down volume .
key to turn off the radio.
2.The radio to search up：In the course of using the radio，double press
volume up key ， search up.
3.The radio to search down：In the course of using the radio，double press
volume dow key ， search down.
4.FM radio volume adjustment method,short press the volume up key
the up volume, short press the volume down key to the down volume .
1.Receive / call/play music
2. Receive / call/play music/Bluetooth intercom
3.Receive / call/play music/Bluetooth Intercom group
Dual mode Bluetooth, Bluetooth 4.0+ Bluetooth 4.1
Supports HSP Profile:, A2DP, AGHSP, HFP
Working hours: 12 hours
Standby time: 300 hours
Charging time: 3 hours
Battery: lithium containing rechargeable lithium battery 800mA
Dimensions: 83 mm *42 mm *19 mm
CE, FCC, TELEC, NCC
Supports HSP Profile:, A2DP, AGHSP, HFP
Working hours: 12 hours
Standby time: 300 hours
Charging time: 3 hours
Battery: lithium containing rechargeable lithium battery 800mA
Dimensions: 83 mm *42 mm *19 mm
CE, FCC, TELEC, NCC
3.unit3 and unit4
bluetooth pairing
bluetooth pairing
2.unit2 and unit3
bluetooth pairing
bluetooth pairing
1.unit1 and unit2
bluetooth pairing
bluetooth pairing
2S
5S
2S
5S
2S
5S
Two intercom bluetooth pairing method
5.Receive / call/play music/Bluetooth Intercom/MODI-01 adapter
9. Play / pause mobile phone music, mobile phone connection status is short
press the phone key to achieve a mobile phone music player /pause.
10. Mobile phone volume adjustment method, a short press the volume key
to the up volume, a short press the volume key to the down
volume.
press the phone key to achieve a mobile phone music player /pause.
10. Mobile phone volume adjustment method, a short press the volume key
to the up volume, a short press the volume key to the down
volume.
1. The first TTS into pairing state: long press the Bluetooth intercom
buton 2S, red LED and blue LED flash quickly let go, the first TTS to
into the initiative find mode。
2. The Second TTS into to passive matching state: Long press the
Bluetooth intercom button 5S, red LED and blue LED flashing slowly let go,
the machine into the passive matching mode.Wait for a moment, the pairing is
completed in the standby mode, the blue LED on the right of the fast flashing 2
times, voice prompts pairing success.
3. Exit the intercom paired state: short Bluetooth intercom button to exit
the paired state ,blue LED indicator returns standby.
4. On / off the Bluetooth intercom intercom: short press Bluetooth intercom
button ,connected Bluetooth intercom,When is Bluetooth intercom, Press
on / off button , hang up the Bluetooth intercom.
5. On / off Bluetooth intercom group (up to 4 units can be established at the
same tme TTS intercom)：The paired intercom after,double press the
first TTS on the Bluetooth intercom buton established intercom
Bluetooth connection group. press on / off button , hang up the Bluetooth
intercom group.
6. Bluetooth intercom volume adjustment method, long press the volume up
key to the up volume, long press the volume down key to the down
volume.
7. Clear the intercom paired record: Volume up key +volume down
key together press 1s, the red light flashes 3 times, remove all intercom
matching records.
buton 2S, red LED and blue LED flash quickly let go, the first TTS to
into the initiative find mode。
2. The Second TTS into to passive matching state: Long press the
Bluetooth intercom button 5S, red LED and blue LED flashing slowly let go,
the machine into the passive matching mode.Wait for a moment, the pairing is
completed in the standby mode, the blue LED on the right of the fast flashing 2
times, voice prompts pairing success.
3. Exit the intercom paired state: short Bluetooth intercom button to exit
the paired state ,blue LED indicator returns standby.
4. On / off the Bluetooth intercom intercom: short press Bluetooth intercom
button ,connected Bluetooth intercom,When is Bluetooth intercom, Press
on / off button , hang up the Bluetooth intercom.
5. On / off Bluetooth intercom group (up to 4 units can be established at the
same tme TTS intercom)：The paired intercom after,double press the
first TTS on the Bluetooth intercom buton established intercom
Bluetooth connection group. press on / off button , hang up the Bluetooth
intercom group.
6. Bluetooth intercom volume adjustment method, long press the volume up
key to the up volume, long press the volume down key to the down
volume.
7. Clear the intercom paired record: Volume up key +volume down
key together press 1s, the red light flashes 3 times, remove all intercom
matching records.
4.Receive / call/play music/Bluetooth Intercom /Walkie-talkie
Group pair method
unit1 long press bluetooth
intercom button 2sec,
let go.
unit2 long press bluetooth
intercom button 5sec,
let go.
Charging interface