Shenzhen Ejeas Technology Co. Ltd. TTS User Manual

                   

 

Installation method   

MOUNTING (Permanent Mount) 

1, Locate and clean a position on the left side of helmet close to lower edge of the 

helmet,  

2,Pell off the 3M double sided tape protective film and place the mount with logo on 

bottom and place mount to the position in step 1 

3,Apply pressure to the metal bracket to the metal bracket to ensure that the bracket 

is, firmly secured. Note: It takes 24hours for adhesive to set. 

                 

 

MOUNTING (Temporary Mount) 

1, Position and fasten the clip bracket onto helmet. 

2, Remove the metal handles after clip bracket has been installed. 

3, Use additional anti-slip rubber patch provided if required. 

       

             

 

INSTALL CONTROL UNIT   

1, from the top, slide Ejeas_TTS unit onto the bracket. You should hear a click sound