BagelLabs co. Ltd. BAGEL001 User Manual
Dimensions
80 x 80 x 30mm (L x W x H)
Weight
118g
Voltage
Input: 5V DC / Driving: 3.3V DC
Display
0.96” OLED (128x64)
Storage Capacity
32MB
Battery
Built-in rechargeable Li-Po (500mAh, 3.7V DC)
Wireless Connectivity
Bluetooth 4.0 BLE (Only)
Laser
Voltage: 3V DC / Current: <25mA,
Wavelength
660nm Red / Class: 2
Materials
Polycarbonate Casing / Dyneema String
Compatible OS
Android, iOS
Measurement Range
String : 0-300cm (0-9’ 10’’)
Wheel: 0-999cm (0-32’ 9’’)
Remote: 30cm - 500cm (1’-16’ 4’’)
Bluetooth Frequency
2.4GHz
Turn the device on by pressing the
Power Button
Select a measurement mode (String/Wheel/Remote).
Press the
Mode/Settings button
to enter mode menu.
Press the
Mode/Settings button
again to switch between modes.
String Mode: Pull out the
hook/string.
Wheel Mode: Roll the
wheel
in the direction guided by the wheel guide laser.
Remote Mode: Point the
ultrasonic sensor
at the target of measurement.
Bagel has three modes of measurement: String, Wheel, and Remote.
→
→
To view your measurements on the device:
Press and hold the
save button
to view logs .
Use the
wheel
or
MODE/SETTINGS BUTTON
to scroll through saved measurements.
To delete a measurement, press the
save button
and select “Yes”.
To delete all measurements, hold the
save button
and select “Yes”.
You can leave the menu by clicking the
cancel/bluetooth button
.
Factory default time zone may differ from yours. You can sync Bagel's time zone
to yours by pairing the device with a smartphone (Section 03).
You can save your measurement with a simple button click.
Press the
save button
once to save the measurement shown on the digital display.
On the “Voice Memo?” screen, use the
WHEEL
or
MODE/SETTINGS BUTTON
to select “Yes” in order to record a voice memo.
Alternatively, select “No” to save without a voice memo.
Alternatively, select “No” to save without a voice memo.
Adding a voice tag to your measurement is optional and you can
always add or edit tags through Bagel’s mobile app.
To pair Bagel with your smartphone:
After pairing is complete, we recommend running the app tutorial
to learn how to sync Bagel’s data.
Press and hold the
cancel/bluetooth button
to enter pairing mode on Bagel.
Download and install the Bagel Labs mobile app from http://www.bagel-labs.com.
“Pairing…” should show up on the digital display.
On the mobile app, enter the settings menu by clicking the button.
On the mobile app, enter the settings menu by clicking the button.
Click on [Bluetooth Pairing] to start the scan for Bagel.
Changing the Unit of Measure
Press and hold the mode/setting button to enter settings menu.
Scroll through menus using the wheel or mode/setting button to highlight [Units].
Press the save button to enter.
Use the wheel or mode/setting button to select [cm], [in], or [mm].
Press the save button to save and exit. Or, press the cancel/bluetooth button to return
to settings menu without saving.
Turning Laser Guide ON/OFF
Press and hold the mode/setting button to enter settings menu.
Scroll through menus to highlight [Laser] and enter.
Select [On] or [Off].
Press the save button to save and exit. Or, press the cancel/bluetooth button to return
to settings menu without saving.
Setting Inside/Outside Measurements
By default, Bagel’s measurements start from 0 (Offset setting OFF). If you want to make inside
By default, Bagel’s measurements start from 0 (Offset setting OFF). If you want to make inside
measurements, e.g. length of window sill, you can set Bagel to offset mode (Offset setting ON).
Then, Bagel’s measurements will start from 8cm (3.15”), which is the diameter of Bagel.
Press and hold the mode/setting button to enter settings menu.
Scroll through menus to highlight [Offset] and enter.
Select [On] or [Off].
Press the save button to save and exit. Or, press the cancel/bluetooth button to return
Select [On] or [Off].
Press the save button to save and exit. Or, press the cancel/bluetooth button to return
to return to settings menu without saving.
Charging the battery before use is recommended but not required.
Bagel ships pre-charged but initial charge will vary.
To charge Bagel, simply connect the included micro USB cable to the
charging port.
The
LED STATUS INDICATOR
should turn red while charging.
Bagel will display “Low battery” at 5%.
Full discharge of the battery can reset the Real Time Clock (RTC) and cause time
inaccuracy. To resynchronize time, pair Bagel with its mobile app.
This device can be operated while charging.
Note: The micro USB port is for charging purpose only and does not support data transfer.