Clarity D702HS KIT D722 4 HS User Manual

8

 9

•  Then press # on handset

3.  Press and hold FIND on the telephone base for about four 

seconds.

4.  Press # (pound key) on the handset. The screen shows 

Registering...Please wait.  

When the handset is registered successfully, HANDSET 
registered and then HANDSET X appears on the screen, with X 
being the handset number (1-5). 

If the registration is not successful, the handset screen shows 
Registration failed. Please start again from step 1 above.
Note: You cannot register a handset if any other system handset is in 
use. To register an expansion handset, follow from the step 3 as above.

Deregister all handsets
You can deregister handsets. You may need to deregister your handsets 
if:

You have five registered handsets and need to replace a handset.

-OR-

You wish to change the designated handset number of your 
registered handsets.

You must first deregister ALL the handsets, and then register each 
handset you wish to use again, one at a time.

If the base of your main unit is represented by either of the drawings 
below, follow the directions below the drawings:

    

     

1.  Press and hold FIND on the telephone base for about 24 

seconds; release FIND.

2.  Immediately press FIND again.
3.   When complete, the handset screen alternately shows 

•  Press FIND on base 4 sec 

and