Clarity D702HS KIT D722 4 HS User Manual

10

 11

•  Then press # on handset. 

4.  To register the handset(s) to the telephone base again, follow 

the registration instructions in section Register a handset.

If the base of your main unit is represented by the drawing below, 
follow the directions below the drawing:

  

1.  Press and hold FIND on the telephone base for about 10 

seconds, until the SPEAKER light starts flashing; release FIND.

2.  Immediately press FIND again; you will hear two quick beep 

tones.

3.   When complete, the handset screen alternately shows 

•  Press FIND on base 4 sec 

and 

•  Then press # on handset. 

4.  To register the handset(s) to the telephone base again, follow 

the registration instructions in section Register a handset.

•

If the deregistration process is not successful, you might need to 
reset the system and try again. To reset, unplug the power from 
the telephone base and plug it back in.

•

You cannot deregister the handset(s) if any system handset is in 
use.

•

If your handset is registered to a base, you can re-register it to 
a different base without deregistering it from the original base. 
Just follow the directions in the section How to add (register) your 
handset to the main unit (sold separately).