Spaun SBK 5503 NFI 842488 User Manual

18.07 V

0.159 A

The receiver sends the DiSEqC 
command Option A, Position A and 
Horizontal High-Band.

Address 10 contains the command 
for all switching components like 
multiswitches, corresponding relays 
or LNBs for the execution of the
receiver commands. 

18.07 V

0.159 A

A transmission error in the DiSeqC-
Protocol will be displayed by the 
LED „Parity-Error“.

12.09 V

0.022 A

The receiver sends the DiSEqC 
command Option B, Position B and 
Vertical High-Band.

Address 14 solely responds to a 
multiswitch.

13.71 V

0.039 A

The receiver sends the DiSEqC 
command Option A, Position B and 
Vertical Low-Band.

Address 10 contains the command 
for all switching components like 
multiswitches, corresponding relays 
or LNBs for the execution of the
receiver commands. 

You have the possibility to check the voltage and the current consumption 
(indirect current metering) of a LNB, relays or a multiswitch when loaded in 
combination with a multimeter. 

In addition to that it is possible to meter the level at the test jack, less 20 dB, 
at normal operation, by using a suitable antenna measuring set.