Spaun SBK 5503 NFI 842488 User Manual
Product codes
842488
24
www.spaun.com
SA
T IF
SA
T IF
Useable as standalone switch for 8 subscribers; for casca-
ding with SMK 17xx9 F (A); as post amplifier or to terminate
a cascadable system.
ding with SMK 17xx9 F (A); as post amplifier or to terminate
a cascadable system.
SAT IF:
• Synchronous level adjuster for each SAT IF system
• LNB supply voltage selectable for the use of
• LNB supply voltage selectable for the use of
Quattro (12V) or QUAD LNBs (22 kHz)
Terrestrial:
• The terrestrial input is passive and return path
compatible with the possibility of a 18 V (250 mA) remote
current in both directions for an amplifier.
Miscellaneous:
• Selective standby function:
If all subscribers only watch TV programms of SAT system A
only the appropriate LNB is supplied with power. The
internal logic turns off the power supply of all other LNBs as
well as that of the integrated amplifiers.
This process results in significant energy savings!
• Ground clamp
Premium-Class
Cascadable Multiswitch 17 in 8
SMS 17089 NF
17 DC-decoupled terminating
resistors are shipped with the SMS
17089 NF to terminate the trunk lines.
ZFR 75 DC /Set (Art.No.: 871511)
resistors are shipped with the SMS
17089 NF to terminate the trunk lines.
ZFR 75 DC /Set (Art.No.: 871511)
The SMS 17089 NF multiswitch
received the ratings „Ausgezeich-
net“ (=“excellent“) and „Sehr gut“
(=“very good“) in the comparative
tests of the professional journals
Digital Fernsehen and SATVISION.
received the ratings „Ausgezeich-
net“ (=“excellent“) and „Sehr gut“
(=“very good“) in the comparative
tests of the professional journals
Digital Fernsehen and SATVISION.
12 V
22 kHz
18 V
12 V
22 kHz
18 V
Standby
Dauerbetrieb/
Always On
LNB supply voltage
selectable, for Quattro
or QUAD-LNB
selectable, for Quattro
or QUAD-LNB
Standby or normal operation
modes selectable for SAT
reception
modes selectable for SAT
reception
-10dB
Synchronous level adjuster for
each SAT IF system
each SAT IF system
LED control:
green = active
yellow
=
standby
red = DC error
Supply voltage selectable
0 V / 18 V
0 V / 18 V
IN
OFF
18 V max.
250mA
250mA
OUT
18 V max.
250mA
250mA
Standby Function and
Switch-Mode Power Supply
Energy
Saver!