Telegärtner H06000A0001 User Manual

Fiber Optic Components

FO Ready-to-install Fiber Optic Links

Telegärtner Karl Gärtner GmbH • Tel: +49-(0)7157 / 1 25-100 • www.telegaertner.com

229

Optical fiber cables are being used on an increasingly wider
front for horizontal wiring systems and especially for ”collapsed
backbones”, where wiring is run directly from the main
distribution panel into the various floors without disribution
panels on each storey.
Normally, the cable installer requires either splicing
equipment or termination kits when installing optical
fiber cables. This equipment is expensive, and assembly
on-site is time-consuming.
As an alternative, Telegärtner offers the TICNET system of

factory-made FO cable assemblies for installation in cable ducts
and manholes.
Where cable lengths, cable and fiber-types are known, the
installer can obtain a wiring system, pre-assembled under
factory conditions, which can be installed into conduits, ducts
and manholes without risk of damage using the rugged non-
crush drawing-in tube. When this has been done, all that is
left to do is to attach the connector to the adapter in the
distribution panel or wall outlet; these are also available,
completely equipped with corresponding adaptors.

Performance Characteristics

• Ready-to-install optical-fiber cable runs with cables to

IEC 60794-1 and design to DIN/VDE 0888; with halogen-
free, flame retardant jacket

• with between 4 and 48 fibers G50/125 and G62,5/125

to IEC 60793 in different link classes.

• with assembled splitters and non-crush pulling tube

• with connector types ST, SC, SC Duplex, MT-RJ, LC, FC/PC,

DIN, F-SMA

• patch panels for 19”or wall distribution panels, and wall

outlets to complement the system

• test certification showing insertion loss
• 15 years guarantee on the system

13.1

FO Universal Cables

Central Loose
Tube OS2

Central Loose
Tube OM2

Central Loose
Tube OM3

Central Loose
Tube OM4

Central Loose
Tube OM1

Standards

Standard

ITU G.652 D
(low water peak)

IEC60793-
2-10

Mechanical Characteristics

Calbe structure acc. DIN/VDE 0888

A/I-DQ(ZN)
BH …

Cable diameter in mm (4-24 fibers)

≤ 6,1

Max. pulling tension short-term/long-term in N

1500 / 700

Max. Crush resistance in N/m

10000

Min. bending radius short-term/long-term

15 x Ø / 10 x Ø

Colour of outer jacket

orange

Weight in kg/km

Climatic Characteristics

Operating temperature / Storage temperature in °C

-30 / +70

Installation temperature in °C

-5 / +50

Flame retardancy

IEC 60332-1

Halogen-free

IEC 60754-2

Watertightness

IEC 60794-
1-2-F5

UV resistance

ISO 4892-2

Optical Characteristics

Fiber Class acc. to ISO/IEC 11801

OS2

OM2

OM3

OM4

OM1

Max. attenuation in dB/km at 850/1300 nm

2,8 / 0,90

3,0 / 1,0

3,2 / 1,1

Max. attenuation in dB/km at 1310/1550 nm

0,40 / 0,30

Bandwidth in MHz x km at 850/1300 nm

600 / 1200

1500 / 500

3500 / 500

200 / 600

Dispersion in ps/nm x km

≤ 3,5 / ≤ 18

Link Class OF in m at 1310/1550 nm: 1 Gbit/10 Gbit

10000 / 10000

Link Class OF in m at 850 nm: 1 Gbit/10 Gbit

600 /82

900 / 300

900 / 550

275 / 33

Link Class OF in m at 1300 nm: 1 Gbit/10 Gbit

600 /n.a.

550 / n.a.

Technical Characteristics

Application

outdoor, for direct burial/indoor

13.1