ABUS RM1100 Leaflet

ABUS Security-Center

RM1100

12 V raise of heat detector

Product highlights:

• For connecting to alarm systems
• Detects temperature changes: 3°C within one minute
• Detects maximum temperature: 60°C
• Can be used in humid spaces

The 12 V raise of heat detector detects incipient fires. It reacts to an
excessive maximum temperature and a sudden temperature rise.
These indicators are reliably detected and reported to the alarm
centre.
The 12 V raise of heat detector is mounted on the ceiling in the
centre of the room. The minimum distance to the side wall should be
30cm. Since the 12 V raise of heat detector does not detect smoke
(as opposed to optical smoke detectors), it is used mainly in places
with high dust and smoke pollution (kitchens, smoke rooms,
garages). The detector triggers an alarm when the maximum
temperature of 57 degrees is exceeded or when the temperature
rises more than 5 degrees with 3 minutes. By changing a jumper,
you can configure it as NO or as NC detector. It is therefore suitable
for every wired alarm system. The 12 V raise of heat detector is
supplied externally with 10-15V operating voltage and is EN54
certified.