Marmitek Control Anywhere 09665 User Manual
Product codes
09665
16
MARMITEK
11 Code Learning:
The EasyTouch35 offers the possibility to learn IR commands from your original remote.
This can be helpful if the necessary codes are not pre-programmed in the EasyTouch35.
It is possible to learn up to 40 keys per mode.
This can be helpful if the necessary codes are not pre-programmed in the EasyTouch35.
It is possible to learn up to 40 keys per mode.
Tips On Learning:
•
•
Always use of new batteries for the ET35 and original remote
•
It is recommended that you carry out a Master Clear before using the learn function
for the first time. You can find the method below.
for the first time. You can find the method below.
•
Place the original remote to the base of the Touchscreen so the IR LED on the original
remote is in line with the Touchscreen opto-diode input (See graphic A on page 3).
remote is in line with the Touchscreen opto-diode input (See graphic A on page 3).
•
Keep the distance between the two remotes to about 5 cm.
•
Experiment by Learning 2 or 3 keys initially and then carry out a Master Clear before
completely Learning your original remote’s keyboard.
completely Learning your original remote’s keyboard.
•
Do not attempt to Learn directly under an incandescent or low-energy light.
•
When Learning a key, do not release the key being Learned until the display returns
and the LED remains on. This can take 2-3 seconds.
and the LED remains on. This can take 2-3 seconds.
•
No functions may be stored under the Touchscreen SCREEN, LIGHT, SLEEP, P<P,
SEARCH keys or under rubber keys Setup, Macro, TV, VCR, DVD, CBL, SAT, CD,
Marmitek X-10 Home Control or Audio keys. It is not possible to learn under
"shifted keys".
SEARCH keys or under rubber keys Setup, Macro, TV, VCR, DVD, CBL, SAT, CD,
Marmitek X-10 Home Control or Audio keys. It is not possible to learn under
"shifted keys".
Master Clear - To Clear all stored Learned Commands (recommended for first time
Learning)
Learning)
1.
Activate your ET35 remote by touching the screen.
2. Press and hold the Setup key until the LED remains on (this occurs after approximately
2-3 seconds) and the display shows the Main Setup Screen.
3. Release the Setup key.
4. Press and hold the Touchscreen "LEARN" key until the Main Setup Screen is displayed
(after approx. 5 seconds). All Learned Command entries are now cleared.
5. Press the Touchscreen "EXIT " key.
To Learn Commands:
1.
Activate your ET35 remote by touching the screen.
2. Press and hold Setup key until the LED remains on (this occurs after approximately 2-3
seconds) and the display shows the Main Setup Screen.
3. Release Setup key.
4. Press and release Touchscreen "LEARN" Key.
5. Display will show the Mode Setup Screen. Press and release desired Mode key (TV,
VCR, SAT, etc.) on the rubber keypad.
20055_20061108_UG_EasyTouch_35_touchscreen_remote 09-11-2006 10:22 Pagina 16