Marmitek Control Anywhere 09665 User Manual

6.  Display will show the Learn Setup Screen. This screen comprises the current labels for

the Mode along with the SETUP and LEARN Touchscreen labels. Press and release the
ET35 remote key (rubber or Touchscreen) to be taught with the original remote key
code. Use the Touchscreen "SCREEN" Key to toggle the screen keys displayed.

7.  Press and hold the original remote key until the LED blinks off once and the display

shows the Learn Next Setup Screen (this process can take up to 2 or 3 seconds to
complete). If there is a problem with learning the LED will flash three times but still
remain in the Learn routine with the Learn Next Setup Screen displayed. To learn
another key, press and release the Touchscreen "LEARN" Key and repeat from Step
"5". To save and exit from the Learn routine, press and release the Touchscreen "OK"
Key. Return to the Main Setup Screen.

8.  Learning is now complete. Press and release the Touchscreen "EXIT" key to return to

normal operation.

1.

Activate your ET35 remote by touching the screen.

2.  Press and hold Setup key until the LED remains on (this occurs after approximately 2-3

seconds) and display shows the Main Setup Screen.

3.  Release Setup key.

4.  Press and release the Touchscreen "LEARN" Key.

5.  Display will show the Mode Setup Screen. Press and release desired Mode key (TV,

VCR, SAT, etc.) on the rubber keypad. The LED will blink off once to indicate the
keypress acceptance.

6.  Display will show the Learn Setup Screen. Press and hold the Setup Key until the

Main Setup Screen is displayed. All Learned Command entries under that Mode are
now cleared.

The ET35 remote allows you to control all electrical appliances you have in your house. In
addition to transmitting infrared signals, which controls your TV, VCR, CD, SAT, CBL,
Audio and DVD, your remote is equipped with a radio transmitter sending Marmitek X10
signals, which will enable you to control lamps and electrical appliances from a distance.

Here are some examples of what you can do with your ET35 remote using home
control mode:
• 

Switch on/off, dim lights while you watch TV.

• 

Switch on the lights at night to frighten intruders when you detect something
suspicious.

• 

Switch on your electric blanket before the film ends to have it warm when you go to sleep.

To control your lamps or appliances, you will need additional home control modules.
The modules are simply plugged into AC outlets with no additional wiring required. Visit
www.marmitek.com for more information.

20055_20061108_UG_EasyTouch_35_touchscreen_remote  09-11-2006  10:22  Pagina 17