Allied Telesis 2-Slot Redundant PSU Chassi f/ AT-9700 Series AT-RPS9700 Leaflet
Product codes
AT-RPS9700
6. Plug the AC power cord for the AT-PWR9700 into the AC
connector on the back panel of the unit.
7. Plug the other end of the AC power cord into a wall outlet.
8. Make sure the LED on the front of the power supply is solid
green.
Note
Ensure that air flow is unrestricted around the AT-RPS9700
unit.
Note
The AT-RPS9700 unit and Ethernet switches should be
connected to power outlets on separate circuits. This will
protect the switches from a loss of power should a power
circuit fail.
Ensure that air flow is unrestricted around the AT-RPS9700
unit.
Note
The AT-RPS9700 unit and Ethernet switches should be
connected to power outlets on separate circuits. This will
protect the switches from a loss of power should a power
circuit fail.
Electrical Safety and Emission
Statement
Standards: This product meets the following standards.
Emission FCC Class A, EN55022 Class A
WARNING: In a domestic environment this product may
cause radio interference in which case the user may be
required to take adequate measures.
Immunity EN55024
Electrical Safety EN60950
Copyright
Emission FCC Class A, EN55022 Class A
WARNING: In a domestic environment this product may
cause radio interference in which case the user may be
required to take adequate measures.
Immunity EN55024
Electrical Safety EN60950
Copyright
© 2004 Allied Telesyn, Inc. All rights reserved.
No part of this publication may be reproduced without prior
written permission from Allied Telesyn, Inc.
written permission from Allied Telesyn, Inc.
U.S. ederal Communications Commission
RADIATED ENERGY
Note: This equipment has been tested and found to comply
with the limits for a Class A digital device pursuant to
Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with this
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
Note: Modifications or changes not expressly approved of by
the manufacturer or the FCC, can void your right to
operate this equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class A digital device pursuant to
Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with this
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
Note: Modifications or changes not expressly approved of by
the manufacturer or the FCC, can void your right to
operate this equipment.
Industry
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les
exigences du Règlement sur le matériel brouilleur du
Canada.
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les
exigences du Règlement sur le matériel brouilleur du
Canada.
P/N 613-50684-00