Intel G870 CM8062307260115 User Manual
Product codes
CM8062307260115
Datasheet, Volume 1
39
Power Management
4
Power Management
This chapter provides information on the following power management topics:
• ACPI States
• Processor Core
• IMC
• PCI Express*
• Integrated Graphics
• Processor Core
• IMC
• PCI Express*
• Integrated Graphics
4.1
ACPI States Supported
The ACPI states supported by the processor are described in this section.
4.1.1
System States
4.1.2
Processor Core/Package Idle States
4.1.3
Integrated Memory Controller States
State
Description
G0/S0
Full On
G1/S3-Cold
Suspend-to-RAM (STR). Context saved to memory (S3-Hot is not supported
by the processor).
G1/S4
Suspend-to-Disk (STD). All power lost (except wakeup on PCH).
G2/S5
Soft off. All power lost (except wakeup on PCH). Total reboot.
G3
Mechanical off. All power removed from system.
Table 4-1.
Processor Core/Package State Support
State
Description
C0
Active mode, processor executing code.
C1
AutoHALT state.
C1E
AutoHALT state with lowest frequency and voltage operating point.
C3
Execution cores in C3 flush their L1 instruction cache, L1 data cache, and L2
cache to the L3 shared cache. Clocks are shut off to the core.
C6
Execution cores in this state save their architectural state before removing
core voltage.
State
Description
Power up
CKE asserted. Active mode.
Pre-charge Power down
CKE de-asserted (not self-refresh) with all banks closed.
Active Power down
CKE de-asserted (not self-refresh) with minimum one bank active.
Self-Refresh
CKE de-asserted using device self-refresh.