Intel G870 CM8062307260115 User Manual

Product codes

CM8062307260115

Datasheet, Volume 1

Introduction

The Intel

Core™ i5-600, i3-500 desktop processor series and Intel

Pentium

desktop processor 6000 series are the next generation of 64-bit, multi-core processors
built on 32-nanometer process technology. Based on the low-power/high-performance
Intel microarchitecture, the processor is designed for a two-chip platform, instead of
the traditional three-chip platforms (processor, (G)MCH, and ICH). The two-chip
platform consists of a processor and Platform Controller Hub (PCH) and enables higher
performance, easier validation, and improved x-y footprint. The Intel

5 Series Chipset

components for desktop and Intel

3400 Series Chipset components for workstations

are the PCH.The processor is designed for desktop and workstation platforms.

This document provides DC electrical specifications, signal integrity, differential
signaling specifications, pinout and signal definitions, interface functional descriptions,
and additional feature information pertinent to the implementation and operation of the
processor on its respective platform.

Note:

Throughout this document, the Intel Core i5-600, i3-500 desktop processor series and

Intel Pentium desktop processor 6000 series may be referred to as “processor”.

Note:

Throughout this document, the Intel

Core™ i5-600 desktop processor series refers to

the Intel

Core™ i5-680, i5-670, i5-661, i5-660, i5-655K, and i5-650 processors.

Note:

Throughout this document, the Intel

Core™ i3-500 desktop processor series refers to

the Intel

Core™ i3-560, i3-550, i3-540, and i3-530 processors.

Note:

Throughout this document, the Intel

5 series Chipset Platform Controller Hub may

also be referred to as “PCH”.

Note:

Throughout this document, the Intel

Pentium

desktop processor 6000 series refers

to the Intel

Pentium

processor G6950 and G6960 processors

Note:

Some processor features are not available on all platforms. Refer to the processor

specification update for details.

Included in this family of processors is an integrated graphics and a memory controller
die on the same package as the processor core die. This two-chip solution of a
processor core die with an integrated graphics and a memory controller die is known as
a Multi-Chip Package (MCP) processor. For specific features supported for individual
Intel Core™ i5-600 and i3-500 desktop processor series and Intel

Pentium

desktop

processor 6000 series SKUs, refer to the Intel

Core™ i5-600 and i3-500 Desktop

Processor Series and Intel

Pentium

Desktop Processor 6000 Series Specification

Update.

Figure 1-1

shows an example platform block diagram.

Note:

Integrated graphics and Memory controller die is built on 45-nanometer process

technology.