Eaton Power-Sure 700 TBL-045K-6 Leaflet

 

•  Processor controlled voltage regulation
•  Tight output voltage regulation
•  Zero-current switching
•  Wide input regulation range
•  Triple shielded, computer grade transformer
•  Highly efficient  —97 percent typical
•  High inrush capability
•  Transient protection and high frequency filter
•  Over/under voltage protection (optional)
•  Includes input circuit breaker
•  Manual bypass switch (optional)

Pulsar series

Eaton Power-Sure 700

Intelligent protection for transmitters & industrial controls

The Eaton

®

 Power-Sure

TM

 700 three-phase power line conditioning 

system provides exceptional system reliability that can be 

attributed to Eaton’s processor-controlled zero-current cross tap 

switching technology.
The Power-Sure 700 combines voltage regulation with a 

transformer and filter to remove transients and noise. The 

combined effect is a regulating and shielded isolation transformer/

system that solves 99 percent of the electrical disturbance 

problems, including electrical brownouts, sags, surges, transients 

and other electrical disturbances.
This state-of-the-art power conditioner also provides the protection, 

efficiency and reliability that are critical to every application with 

sensitive equipment.

10–300 kVA

•  RRM2020—Regulation Range Monitor has above, below and 

normal LED indicator lights that indicate when the input is beyond 
the regulation range or within the range.

•  RBS202x—Integral Manual Rotary Maintenance Bypass Switch 

Specific models numbers include:

 

RBS2020 - 10 to 15 kVA units

 

RBS2021 - 25 to 30 kVA units

 

 RBS2022 - 45 to 125 kVA units

 

RBS2023 - 150 kVA units

 

RBS2024 - 225 to 300 kVA units

•  REP2020—Remote Emergency Power Off Option (REPO)—a 

remotely mounted pushbutton is provided with 50 feet of cable. 
The Shunt Trip option, STC2020, is required with this option.

•  STC2020—Shunt Trip for Main Circuit Breaker Option.

•  UOV2020—Under/Over Voltage Shutdown Option—if the output 

exceeds preset values, the unit output will shut off electronically  
& illuminate a diagnostic light.

•  PSO2020—Under/Over Voltage Shutdown with Loss of Power Shut 

Off—instead of disabling the output, this option will shunt trip the 
main circuit breaker if the output voltage exceeds preset values. 
The Shunt Trip option, STC2020, is required with this option.

•  ERR1040—Extended Regulation Range Option—provides +10% 

to - 40% input regulation range for intermittent duty only. Output 
regulation is +5% to -6% from nominal with this option.