Talkswitch TS-50e CT-TP001-107001 Leaflet

7. If connecting another expansion module, repeat steps 2 to 6.

A second expansion module is attached to the right side of the
first expansion module.

Set the expansion module
and phone stands to the
same angle.

1. Align the top tabs on

the stands with the
slots on the back of
the expansion module
and phone.

2. Move each stand

upward until it clicks
into place.

1. Connect power to the phone. The phone and expansion

modules will power up. The expansion modules use the
electrical connection of the phone for power. Expansion
modules do not require their own power source.

2. After you power up your phone, the expansion module LEDs

flash until communication with the phone is established.

1. Remove the stands from 

the phone and

expansion module.

2. Ensure that the 

cables are properly
connected to the
phone, and then
connect the expansion
module to your phone,
as previously described.

3. Wall-mount the phone

and expansion module
using the keyholes in the
back of the phone and
expansion module.

For additional information about line appearance and how to
program the flexible keys, please read the TS-550i User Guide at
http://www.talkswitch.com/support. Select Documentation >
Phones then click on the appropriate link.

Copyright © 2011 Fortinet, Inc. All rights reserved. Fortinet

®

, FortiGate

®

, FortiGuard

®

,

 FortiCare

®

, FortiManager

®

, FortiAnalyzer

®

, and TalkSwitch

®

are registered trademarks of

Fortinet, Inc. and other Fortinet names herein may also be registered trademarks and/or  common
law trademarks of Fortinet. Other product or company names may be  trademarks of their
 respective  owners.

Rev. 4/29/2011

CT.TS005.016001

All specifications are subject to change without notice.