Saeco Super-automatic espresso machine HD8838/02 HD8838/02 User Manual

• 6 •

• 6 •

•  Remove the water tank from its place.
•  Rinse and fi ll it with fresh water mak-

ing sure that it is not fi lled exceeding 
the (MAX) level indicated in the tank. 
Put the tank back in its place.

•  Remove the coff ee bean hopper cover.

•  Slowly pour the coff ee beans into the 

hopper.

•  Replace the coff ee bean hopper cover.

•  Insert the plug into the socket on the 

back of the machine. 

•  Insert the plug of the other end of the 

cable into a wall socket with suitable 
power voltage.

•  Switch the power button to “I” to turn 

the machine on.

•  Make sure the selector switch is on “

” position; if necessary, turn it to the 
indicated position.

•  To turn the machine on simply press the 

ON/OFF button.

•  The display indicates that the machine 

is priming the circuit.

•  The display shows the ON/OFF icon.

This cycle allows rinsing the coff ee circuits 
with fresh water.

The cycle is carried out:
•  At machine start (with cold boiler)
•  After priming the circuit (with cold 

boiler)

•  During the Stand-by preparation phase 

(if a coff ee product has been brewed)

•  During the turning off phase after 

pressing the ON/OFF button (if a cof-
fee product has been brewed).

A small amount of water will be dis-
pensed to rinse and heat all the machine 
components; in this phase this icon is 
displayed.

Wait for the cycle to fi nish automatically. 
You can stop dispensing by pressing 
either the coff ee button and/or the 
ON/OFF button.