Liebert MPXIPC-NXH30XXX User Manual

1. Insert two spring nuts into the T-slot on a rear upright frame member (see Figure 11).
2. Position the spring nuts to accommodate screws inserted through slots in the brackets. To move 

the spring nuts, press down on each with a small, pointed object and slide each into position.

3. Hold an L-shaped bracket in place and attach it with two of the M5x10 screws with hex heads.
4. Tighten the hex-head screws firmly with the Allen wrench.
5. Repeat Steps 1 through 4 for the lower L-shaped bracket. The brackets will attach the Liebert

®

 

MPX

™

 more securely if one is near the top of the unit and one is near the bottom.

6. After the brackets are attached, hang the Liebert MPX in the rack by inserting the Liebert MPX 

mounting screws into the slots on the brackets (see Figure 12).

7. Tighten the Liebert MPX mounting screws securely.