Toshiba Strata DK Admin User Manual
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Upgrade
109
Backup Menu (DKBackup)
If the following message displays:
Problem: Unable to Establish
Communications
, follow the steps on the screen and/or refer to
Appendix A –
Connecting to Strata DK
to correct the problem.
4. From the Administration Menu/Backup Menu, type
b
. The DK Code dialog box displays.
5. Enter the four-digit DK Code that is programmed on the installed processor. The DK
System Program File screen displays as shown below. For security, this code does not
display on screen as you type it. The default code is 0000. This is the “1st level password”
which is set in the Strata DK Program 00 (see the record sheet for Program 00 in the Strata
DK Programming Manual).
display on screen as you type it. The default code is 0000. This is the “1st level password”
which is set in the Strata DK Program 00 (see the record sheet for Program 00 in the Strata
DK Programming Manual).
If the Problem: Unable to Establish Communications screen displays (shown below),
check the items listed on the screen and/or refer to
check the items listed on the screen and/or refer to
Appendix A – Connecting to Strata
DK
.
6. Press
F5
(Upgrade). The screen below provides instructions regarding Program 03.
7. Press the spacebar to display the screen below (this is an sample upgrade RCTU-CD to
RCTU-EF Release 3 or Release 3.10).
DK System Program File
✔
Program No.
Program Title
PRGALL
All System Programs
REPALL
All Station and System Speed Dial Numbers
NAMEALL
All User Names
VIDALL
All Voice Mail ID Codes (#656)
MIDALL
All Voice Mail Message Waiting Codes (#657)
ADMEMOAL
All Station and System Speed Dial Memos
MSGALL
All Station and System LCD Messages
CFALL
Directory Number Call Forwarding settings (R3)
MWALL
Message Waiting Lamp settings (R3)
CLID
Caller ID/ANI Lost Call telephone numbers (R3)
F1
-Help
SPACE-(Un)Tag
F2
-(Un)Tag All
F3
-Backup
F4
-Restore
F5
-Upgrade
Esc-Exit
Select If Marked
Processor Conversion
Note:
After the data are upgraded, the new data will be sent to the DK. You
will then need to modify Program 03 and upload to the DK.
Processor Conversion
Processor Currently in Use: DK, RCTU-CD, R3
Processor to Upgrade to:
DK, RCTU-EF, R3
Backup From DK First: Yes
Get user manuals:
See SafeManuals.com