TP-LINK TL-WR 841 ND User Manual

 

TL-WR841N/TL-WR841ND

 

-65- 

4. Click 

“Access Control  → Rule” in the left to return to the Access Control Rule Management 

page. Select “Enable Internet Access Control” and choose "Allow the packets specified by 
any enabled access control policy to pass through the Router". 

5. Click 

Add New... button to add a new rule as follows:   

z

 

In Rule Name field, create a name for the rule. Note that this name should be unique, 

for example Rule_1.   

z

 

In Host field, select Host_1.   

z

 

In Target field, select Target_1.   

z

 

In Schedule field, select Schedule_1.   

z

 

In Action field, select Allow.   

z

 

In Status field, select Enable.   

z

 

Click Save to complete the settings. 

Then you will go back to the Access Control Rule Management page and see the following list. 

 

Choose menu “Access Control → Host”, you can view and set a Host list in the screen as 

shown in Figure 4-48. The host list is necessary for the Access Control Rule. 

 

Figure 4-48  Host Settings 

¾

 

Host Description - Here displays the description of the host and this description is unique.   

¾

 

Information - Here displays the information about the host. It can be IP or MAC.   

¾

 

Modify - To modify or delete an existing entry.   

1. Click 

the 

Add New… button. 

2. In 

the 

Mode field, select IP Address or MAC Address. 

z

 

If you select IP Address, the screen shown is Figure 4-49.