Tyan S1572 ATX User Manual
24
S1572-001-01 http://www.tyan.com
w Video
This category detects the type of graphics adapter used for the primary
display system. It must match your video display card and monitor. Al-
though secondary monitors are supported, you do not have to select that
type in setup.
This category detects the type of graphics adapter used for the primary
display system. It must match your video display card and monitor. Al-
though secondary monitors are supported, you do not have to select that
type in setup.
EGA/VGA
Enhanced Graphics Adapter/Video Graphics Array.
For VGA,SVGA, or PGA monitor adapters.
For VGA,SVGA, or PGA monitor adapters.
CGA 40
Color Graphics Adapter, power up in 40 column mode.
CGA 80
Color Graphics Adapter, power up in 80 column mode.
Mono
Monochrome adapter, includes hi-res monochrome.
w Halt On
The category determines whether the computer will stop if an error is
detected during power up.
The category determines whether the computer will stop if an error is
detected during power up.
No errors
Whenever the BIOS has detected a non-fatal error, the
system will be stopped and you will be promted.
system will be stopped and you will be promted.
All errors
The system boot will not be stopped for any errors that
are detected.
are detected.
All, but Keyboard The system boot will not stop for a keyboard error;it
will stop for all other errors.
All, but Diskette The system boot will not stop for disk errors; it will
stop for all other errors.
All, but Disk/Key The system boot will not stop for a keyboard or disk
error; it will stop for all other errors.
w Memory
The category is for display-only and it is determined by POST (Power On
Self Test) of the BIOS.
The category is for display-only and it is determined by POST (Power On
Self Test) of the BIOS.
Base Memory
The POST of the BIOS will determine the amount of
base (or conventional) memory installed in the system.
The value of the base memory is typically 640K.
base (or conventional) memory installed in the system.
The value of the base memory is typically 640K.
Extended Memory
The BIOS determines how much extended memory is
present during the POST. This is the amount of
memory located above 1MB in the CPU's memory
address map.
present during the POST. This is the amount of
memory located above 1MB in the CPU's memory
address map.