Panasonic DMC-FZ20GN User Manual
Connecting to a PC or Printer
96
Connecting to a PC
• If you use Windows 98/98SE, install the
USB driver and then connect it to the
computer.
computer.
• When using Windows Me/2000/XP, Mac
OS 9.x and Mac OS X, you do not have to
install the USB driver.
install the USB driver.
A: USB connection cable (supplied)
B: AC adaptor (DMW-CAC1; optional)
B: AC adaptor (DMW-CAC1; optional)
1 Turn the camera on and set the
[USB MODE] according to the OS
you use.
you use.
• Set to [PC] or [PictBridge (PTP)]. Refer
to “Before Connecting with USB
Connection Cable” on page 94.
Connection Cable” on page 94.
• If [USB MODE] is set to [PictBridge
(PTP)] while Windows XP or Mac OS X
is used, it is connected as PTP.
is used, it is connected as PTP.
2 Connect the camera to a PC via
the USB connection cable
A
(supplied).
• Connect the USB connection cable with
the [
] mark facing you.
• Hold
C and then insert or pull the USB
connection cable straight.
Depending on the USB mode setting, the
indications on the screen may vary. Refer
to page 97.
indications on the screen may vary. Refer
to page 97.
FZ20-GN.book 96 ページ 2004年8月9日 月曜日 午後5時51分