Panasonic DMC-FZ20GN User Manual

Connecting to a PC or Printer

By connecting the camera directly to a 
printer supporting PictBridge via the USB 
connection cable (supplied), you can select 
the pictures to be printed or start printing. 

A: USB connection cable (supplied)
B: AC adaptor (DMW-CAC1; optional)

A 

• Connect the USB connection cable with 

the [

] mark facing you.

• Hold 

C and then insert or pull the USB 

connection cable straight. 

• If the remaining battery power becomes 

low during communication, the power 
indicator blinks and the alarm beeps. In 
this case, stop the communication at 
once. Then turn the camera off and 
replace the battery with a charged one or 
charge the battery. Or, use the AC adaptor 
(DMW-CAC1; optional).

• Set the print settings such as print quality 

on the printer beforehand. Ask the 
manufacturer of the printer about the 
corresponding models. (Read the printer 
operating instructions, too.)

• It may take time to print some pictures. 

Therefore, we recommend using a battery 
with sufficient power (P12) or the AC 
adaptor (DMW-CAC1; optional) when you 
connect to a printer.

• Disconnect the USB connection cable 

after printing.

• Do not use any other USB connection 

cables except the supplied one.

When the DPOF 
Print is set. (P83)

Select [DPOF 
PICTURE]. (P100)

When the DPOF 
Print is not set.

Select [SINGLE 
PICTURE]. (P99)

FZ20-GN.book  98 ページ  ２００４年８月９日　月曜日　午後５時５１分