Pelco C1528M-F User Manual

52

C1528M-F (6/05)

Figure 40.  Program Cameras

1. In the CAMERA field, select the logical camera number of the video input to be defined.

2. In the CONTROL field, select the receiver control type.

EXT COAX: Coaxitron extended mode (32-bit)
STD COAX: Coaxitron standard mode (15-bit)
MUX: Genex multiplexer
PTZ-A: RS-422 Control Port A
PTZ-B: RS-422 Control Port B
M-02: Reserved for future use
M-08: Reserved for future use

NOTE:  If you select PTZ-A or PTZ-B you must also program Serial Port 9 or 10 (refer to Ports in this section). A 96 x 16 System includes 
PTZ-C and PTZ-D (Serial Ports 11 and 12).

3. The PORT ADDRESS field is required for Genex or RS-422 control only.

Genex multiplexer: Select the address of the multiplexer (01-32); this address must match the unit ID specified through multiplexer 
programming. Refer to the MX4000 Genex Series Simplex and Duplex Multiplexers Installation/Operation Manual.

RS-422 cameras: Select the camera/device address for RS-422 control (01-32). The port address must match the address setting 
configured through the camera/receiver DIP switch settings.

PELCO SWITCHER

MODEL CM6800E

MAIN MENU

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

CAMERA

LOGICAL CAMERA

MONITOR

ACCESS

TIME & DATE

PORT

PRIORITY

SEQUENCE

MACRO

ALARM CONTACTS

EVENT TIMER

SET AUXILIARY

SET PASSWORD

SYSTEM

ABOUT CM6800E

ENGLISH

RETURN

            CAMERA 0001

VERTICAL DRIVE:
CONTROL:
PORT ADDRESS:

      CAMERA TITLE

CAM 1
 
SELECT CHARACTER
          
           RETURN          

OFF
EXT COAX
01