Pelco C1528M-F User Manual
70
C1528M-F (6/05)
CREATE AND RUN A PATTERN
Patterns are not available with the KBD100 keyboard.
KBD200A/300A KEYBOARDS
KBD960/KBR960 KEYBOARDS
Create a Long Pattern
Refer to the KBD960 Keyboard Installation/Operation manual for
instructions on creating a pattern.
instructions on creating a pattern.
1. Select
to display the Preset Menu.
2. Select
to start a pattern.
OR
1. Select
to display the Preset Menu.
2. Enter 1.
3. Select
to run the first pattern of previously defined
half-patterns.
OR
1. Select
to display the Preset Menu.
2. Enter 2.
3. Select
to run the second pattern of previously defined
half-patterns.
1. Enter a camera number.
2. Enter 0.
3. Press and hold the PATTERN key for two seconds.
4. The monitor will indicate the programming function is active.
Move the camera position as desired for the pattern.
5. Press the ACK key to close the programming function.
Create a Short Patter
1. Enter a camera number.
2. Enter the short pattern number (1 or 2).
3. Press and hold the PATTERN key for two seconds.
4. The monitor will indicate the programming function is active.
Move the camera position as desired for the pattern.
5. Press the ACK key to close the programming function.
Run a Long Pattern
1. Press the PATTERN key.
2. Move the joystick or call a preset to stop the pattern.
Run a Short Patter
1. Enter the short pattern number (1 or 2).
2. Press the PATTERN key.
3. Move the joystick or call a preset to stop the pattern.
PRST
PRST
PRST