Pelco C1528M-F User Manual

C1528M-F (6/05)

71

Local auxiliaries are the outputs on the rear panel of the CM6800E. External auxiliaries are available by connecting an REL2064 Relay Interface 
Unit to the CM6800E through COM port 3.

The CM6800E can control up to four REL2064 Relay Interface Units connected to the system. Each unit provides 64 relays. Refer to the REL2064 
Relay Interface Unit Installation/Operation Manual for detailed information. External relays cannot be operated with the KBD100.

Auxiliary control is not available with the KBD100.

Auxiliary 1 relay: Press F1 to activate/deactivate.

Auxiliary 2 TTL output: Press F2 to activate/deactivate.

Auxiliary 1 relay: Press F12* to activate/deactivate.

Auxiliary 2 TTL output: Press F24* to activate/deactivate.

* F12 and F24 are the default auxiliary control function keys; 

user-selected function keys can be defined through the Key Define 
Menu. Refer to the KBD960 Keyboard Installation/Operation 
Manual for instructions.

NOTE:  If you connect REL2064 Relay Interface Units (up to four) to 
the CM6800E, operation of the two relays on the rear panel of the 
CM6800E will also operate the first two relays on the first external 
unit (unless you number the external relays starting at 64).

The KBD200A/300A keyboards (firmware version 4.2 and later) can 
operate external relays.

Refer to the KBD200A Keyboard Installation/Operation Manual or the 
KBD300A Keyboard Installation/Operation Manual for instructions.

NOTE:  External relays cannot be operated with KBD200A/300A 
keyboard firmware versions prior to 4.2.

1. Enter the GPI number for the appropriate relay output.

2. Press .

3. Press the desired AUX number icon to activate the relay and 

associated peripheral device.

(Press 

 to access AUX 5-8.)

4. If 

 is highlighted, the operation is momentary. If 

 is not 

highlighted, the operation is latching. Refer to the KBD960 
Keyboard Installation/Operation Manual for instructions.

Press AUX ON/F4 to activate.

Press AUX OFF/F5 to deactivate.

OR

To control a momentary function:

1. Enter the auxiliary number.

2. Press and hold AUX ON/F4, and then release.

1From the Camera Menu, press 

, and then release to control an 

AUX 1 momentary function on the selected camera.

Press 

 to control an AUX 2 momentary function. Press 

 to 

access  

through .