ZyXEL Communications NWA-1100 User Manual

 Chapter 13 Log Screens

ZyXEL NWA-1100 User’s Guide

Use this screen to configure to where and when the ZyXEL Device is to send the logs and 
which logs and/or immediate alerts it is to send. 
To change your ZyXEL Device’s log settings, click LOGS > Log Settings. The screen 
appears as shown. 

Figure 60   Log Settings

The following table describes the labels in this screen.

Table 37   Log Settings

Address Info

Mail Server 

Enter the server name or the IP address of the mail server for the e-mail 

addresses specified below. If this field is left blank, logs and alert messages 

will not be sent via e-mail. 

Mail Subject

Type a title that you want to be in the subject line of the log e-mail message 

that the ZyXEL Device sends. 

Send Log to 

Logs are sent to the e-mail address specified in this field. If this field is left 

blank, logs will not be sent via e-mail. 

SMTP Authentication

If you use SMTP authentication, the mail receiver should be the owner of the 

SMTP account.