ZyXEL Communications Vantage Service Gateway VSG-1200 V2 User Manual

VSG-1200 V2 User’s Guide

189

Chapter 28 System Status

The VSG provides a NAT address pool feature for use with VPN. It allows subscribers to 
connect to remote VPN servers that allow only one connection per source IP address.

Click System Status and NAT Pool Table to open the screen shown next. This screen displays 
the LAN and WAN IP addresses that are currently being used as well the VPN types.

Figure 126   System Status: NAT Pool Table 

The following table describes the labels in this screen. 

The LAN Devices Status screen displays the status of LAN devices configured in the LAN 
Devices screen (refer to 

).

Idle 

This field displays the number of seconds of inactivity for a session.

Go .. page

Select a page number from the drop-down list box to display the selected page.

First

Click First to go to the first page.

Previous

Click Previous to return to the previous page.

Next

Click Next to go to the next page.

End

Click End to go to the last page.

Table 64   System Status: Session List  (continued)

Table 65   System Status: NAT Tool Table 

No

This field displays the index number of an entry.

Source IP Address This field displays the IP address of the subscriber device on the LAN that is using 

the VPN.

Source MAC 

Address

This field displays the MAC address of the subscriber device on the LAN that is 

using the VPN.

Translated IP 

Address

This field displays the WAN IP address of the VSG to which the LAN IP address of 

the subscriber using the VPN was translated.

VPN Type

This field displays the type of VPN connection that is being used (IPSec or PPTP).