ZyXEL Communications Vantage Service Gateway VSG-1200 V2 User Manual

VSG-1200 V2 User’s Guide

225

Chapter 32 Using The SMT

In the SMT main menu, type 5 and press [ENTER] to display the Utilities Menu screen. To 
return to the Main Menu screen, press 3. 

Figure 171   SMT: Utilities Menu  

Note: You MUST run a TFTP server on a computer where a firmware file is stored to 

upgrade the firmware on the VSG.

You MUST have a WAN/LAN connection between the VSG and the TFTP 
server computer at the same time.

Follow the steps below to configure the TFTP settings in the SMT. 

1 Connect the computer directly to the VSG through the console port. Refer to the section 

on establishing a console port connection for more information.

2 In the SMT main menu, type 5 and press [ENTER] to display the Utilities Menu screen.

3 Type 1 and press [ENTER] to display the Firmware Upgrade screen.

4 Enter the IP address of the computer running the TFTP server in the TFTP Server IP 

Address field.

5 Specify the name of the firmware file in the Download Filename field.

Figure 172   SMT: Firmware Upgrade  

                       Utilities Menu

                        1)Firmware Upgrade
                        2)Change Password
                        3)Return to Main Menu

                           Enter selection:

Enter a numeric between 1 and 3.

                              Firmware Upgrade

                   TFTP Server IP Address :172.21.4.72
                   Download Filename      :vsg1200v105.bin

           E)xecute Download    R)eturn to Main Menu   M)odify
           Enter Selection:

Enter the command key and press enter.