ZyXEL Communications Vantage Service Gateway VSG-1200 V2 User Manual

VSG-1200 V2 User’s Guide

45

Chapter 3 The Web Configurator

In a configuration screen, you must click Apply to save the changes. A Success screen 
displays when the configuration settings are saved to the VSG. Click back to return to the 
previous screen.

Figure 13   Apply: Success  

For specific settings (such as the device IP address, subscriber authentication method, etc.), 
you will be prompted to restart the VSG after you click Apply in the configuration screen. A 
Restart screen displays. Click Apply again to restart the VSG and make the changes take 
effect. 

Figure 14   Apply: Restart 

There are four system accounts that you can use to log in to the VSG: administrator, account 
manager, supervisor and super subscriber.

• The administrator account allows you full access to all system configurations. The default 

administrator user name is “admin” and password “1234”.

• The account manager account is used for subscriber account management only. No 

system configuration is allowed. This account is useful for front desk personnel (such as 
in a hotel) for setting up subscriber accounts without tampering with the system 
configuration. The default user name and password are “account”.

• With the supervisor account, you can only view the system status and change the 

supervisor account password. The default user name are “supervisor”. 

• The super subscriber account is used for testing the Internet connection between the VSG 

and the ISP. There is no time limitation or billing imposed on this account. Thus anyone 
who logs in with this account is able to gain Internet access for free. The default super 
subscriber user name and password are “super”.

Note: It is recommended that you change the system login passwords.