ZyXEL Communications Vantage Service Gateway VSG-1200 V2 User Manual

VSG-1200 V2 User’s Guide

47

Chapter 3 The Web Configurator

You can restore the device to the factory defaults in one of the following ways. 

• The RESET button on the front panel of the VSG (press this button once). Use this 

method for cases when the username and password of the VSG is not known (refer to 

).

• The web configurator (refer to 

). 

• The SMT (refer to 

Note: You must restart the VSG every time you change the system IP address or 

upload a firmware or configuration file.

All unsaved changes will be lost once you restart the VSG. 

In the Main Menu screen, click System Tools, Restart and click Apply.

Confirm

Enter the new administrator password again for confirmation.

Supervisor Account

This account allows you to view device status only. 

Username

Enter the user name for the supervisor account. The default is supervisor

Password

Enter a new supervisor password. The default is supervisor. 

Confirm

Enter the new administrator password again for confirmation.

Super Subscriber 

Account

Once you have configured the Internet connection settings on the VSG, you 

can use this account to test the Internet connection through the VSG. 

Super Subscriber Select Enable to activate this account. 

Select Disable to deactivate this account. 

Idle Timeout

By default, the VSG automatically logs out a super subscriber after five minutes 

of inactivity. 
Enter a number (1 to 1440) to set the VSG to log out the super subscriber after 

the specified inactivity timeout (in minutes). 

Username

Enter the user name for the account manager account. The default is super.

Password

Enter a new account manager password. The default is super. 

Confirm

Enter the new administrator password again for confirmation.

Apply

Click Apply to save the changes back to the VSG.

Table 3   System Tools: System Account  (continued)