Panasonic CU-RE9JKX User Manual

28

1 

Remove the control board cover from the unit by loosening the screw. 

2 

Connecting cable between indoor unit and outdoor unit shall be approved polychloroprene sheathed 4x 
1.5mm

2

 flexible cord, type designation 245 IEC 57 or heavier cord. 

3 

Secure the cable onto the control board with the holder (clamper). 

4 

Attach the control board cover back to the original position with the screw. 

5 

For wiring stripping and connection requirement, refer to instruction 10.2.4 of indoor unit. 

1 

Please carry out insulation at pipe connection portion as mentioned in Indoor/Outdoor Unit Installation 
Diagram. Please warp the insulated piping end to prevent water from going inside the piping. 

2 

If drain hose or connecting piping is in the room (where dew may form), please increase the insulation by 
using POLY-E-FOAM with thickness 6mm or above.