Panasonic PT-DZ680ULS User Manual
ENGLISH - 79
Chapter 4 Settings — [PROJECTOR SETUP] menu
6)
Press qw to switch [GROUP].
r
f
The setting will change among [A] to [Z] each time you press
the button.
7)
Press as to select [RESPONSE(ID GROUP)].
8)
Press qw to switch [RESPONSE(ID GROUP)].
r
f
The setting will change between [ON] and [OFF] each time you
press the button.
r
r
[RESPONSE(ID ALL)]
[ON]
Returns the response when the ID setting is ALL.
[OFF]
Does not return the response when the ID setting is ALL.
r
r
[GROUP]
[A] - [Z]
Controls multiple projectors simultaneously by sending the ID of RS-232C.
Set the group from [A] to [Z]. The projector responds when the ID of RS-232C matches the setting.
r
r
[RESPONSE(ID GROUP)]
[ON]
Returns the response when the ID setting is GROUP.
[OFF]
Does not return the response when the ID setting is GROUP.
Note
r
f
Refer to “<SERIAL IN>/<SERIAL OUT> terminal” (x page 119).
[REMOTE2 MODE]
You can set the <REMOTE 2 IN> terminal.
1)
Press as to select [REMOTE2 MODE].
2)
Press qw to switch [REMOTE2 MODE].
r
f
The setting will change between [DEFAULT] and [USER] each
time you press the button.
r
f
When [USER] is selected, proceed to Step
3).
3)
Press the <ENTER> button.
4)
Press as to select any from [PIN2] to [PIN8]
and press qw to switch the setting.
r
f
[PIN1] and [PIN9] cannot be changed.
r
r
[REMOTE2 MODE]
[DEFAULT]
The pin assignment of the <REMOTE 2 IN> terminal is used by the factory default setting of the projector.
(x page 122)
[USER]
The pin assignment of the <REMOTE 2 IN> terminal is used by the setting changed from the factory default
setting of the projector.
[STATUS]
Displays the status of the projector.
1)
Press as to select [STATUS].
2)
Press the <ENTER> button.
r
f
The
[STATUS] screen is displayed.
3)
Press qw to switch the pages.
r
f
The page will change each time you press the button.
r
r
Contents to be displayed
[INPUT]
Displays the input terminal currently selected.
[SIGNAL NAME]
Displays the input signal name.
[SIGNAL FREQUENCY]
Displays the frequency of the input signal.
[PROJECTOR RUNTIME]
Displays the operation times of the projector.
[LAMP1]
*
Displays the hours used of lamp 1.
[LAMP2]
*
Displays the hours used of lamp 2.
[INTAKE AIR TEMP.]
Displays the status of the air intake temperature of the projector.
[OPTICS MODULE TEMP.]
Displays the status of the internal temperature of the projector.
[AROUND LAMP TEMP.]
Displays the status of the temperature around the lamps of the projector.
[PROJECTOR TYPE]
Displays the type of the projector.
[SERIAL NUMBER]
Displays the serial number of the projector.
[LAMP UNIT MODEL NO.]
Displays the model no. of the lamp unit.