Panasonic PT-DZ680ULS User Manual
80 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
[LAMP1 SERIAL NUMBER]
Displays the serial number of the lamp 1.
[LAMP2 SERIAL NUMBER]
Displays the serial number of the lamp 2.
[MAIN VERSION]
Displays the main version of the firmware of the projector.
[SUB VERSION]
Displays the sub version of the firmware of the projector.
[NETWORK VERSION]
Displays the network version of the projector.
[ON COUNT]
[POWER ON TIMES]
Displays the number of times the power is turned on.
[LAMP1 ON]
Displays the number of times lamp 1 has been turned on.
[LAMP2 ON]
Displays the number of times lamp 2 has been turned on.
[SHUTTER]
Displays the number of times the shutter function has been used.
[LAMP1]
Displays the details of cumulative operating time.
[LAMP2]
Displays the details of cumulative operating time.
[NUMBER OF ENTRY SIGNAL]
Displays the number of registered signals.
[REMOTE2 STATUS]
Displays the control status of the REMOTE2.
[SIGNAL INFORMATION]
[MEMORY NO.]
Displays the memory number of the input signal.
[INPUT]
Displays the input terminal currently selected.
[SIGNAL NAME]
Displays the input signal name.
[SIGNAL FREQUENCY] Displays the frequency of the input signal.
[SYNC.STATE]
Displays the synch polarity of the input signal.
[V.SYNC WIDTH]
Displays the vertical sync signal pulse width of the input signal.
[SCAN TYPE]
Displays the scan type of the input signal.
[TOTAL DOTS]
Displays the total dot count of the input signal.
[DISPLAY DOTS]
Displays the number of input signal display dots.
[TOTAL LINES]
Displays the total line count of the input signal.
[DISPLAY LINES]
Displays the number of input signal display lines.
[SAMPLING]
Displays the sampling information of the input signal.
* Displays the actual time for the hours used of lamp.
To calculate a rough guide for lamp replacement, convert as follows:
Lamp replacement time =
Cumulative operating time when [LAMP POWER] is set to [NORMAL] + (Cumulative operating time when [LAMP POWER] is set to [ECO] x
5/6)
Note
r
f
The content of status can be sent via E-mail by pressing the <ENTER> button while displaying the status.
r
f
Some items in [SIGNAL INFORMATION] may be displayed and others not displayed, depending on the signal being input.
r
f
The “lighting time” and “usage time” of the lamp displayed in [STATUS] may differ from the actual time if the lamp unit that has been used on
other models than this projector (PT-DZ680U) is attached and used on the projector, or if the lamp unit that has been used on this projector
(PT-DZ680U) is attached and used on other projector models.
[NO SIGNAL SHUT-OFF]
You can set the power of the projector automatically to standby if there is no input signal by the specified time.
1)
Press as to select [NO SIGNAL SHUT-OFF].
2)
Press qw to switch [NO SIGNAL SHUT-OFF].
r
r
[NO SIGNAL SHUT-OFF]
[DISABLE]
Disables the No signal shut-off function.
[10MIN.] - [90MIN.]
Allows you to set in ten minutes intervals.
[FUNCTION BUTTON]
Set the functions of the <FUNCTION> button on the remote control.
1)
Press as to select [FUNCTION BUTTON].
2)
Press the <ENTER> button.
r
f
The
[FUNCTION BUTTON] screen is displayed.
3)
Press as to select a function.
4)
Press the <ENTER> button.
r
r
Available functions
[DISABLE]
Disables the <FUNCTION> button.