Manualsbrain.com
  1. Manuals
  2. Brands
  3. Zebra
  4. HW46211
  5. User Manual

Zebra HW46211 User Manual

Download
Page of 275
13185L-002 Rev. A  1/24/06
110XiIIIPlus Maintenance Manual
Page 4-55
Maintenance
Section 4
.
Figure 4-32.   Remove and Install the Cutter Main and Slotted Link 
5. Remove the E-ring securing the cutter main link to the upper drive arm on the cutter 
assembly.
6. Ensure that the pivot pin remains in the slotted link, and remove the cutter main 
link.
7. Install the new cutter main link onto the cutter assembly and pivot pin in the slotted 
link.
8. Secure both ends with E-rings.
9. Reinstall the power supply.
10. Reinstall the electronics cover.
11. Reconnect data cables and AC power cord.
12. Turn the printer On (l).
Bearing
Main Link
Notch
E-Ring
Washer
Slotted Link
Washer
E-Ring
E-Ring
E-Ring
Post Pivot
Lower Drive Arm
Upper Drive Arm
Stud
E-Ring
Pivot Pin
Cutter
Assembly
Note • The notch in the main link must be at the top and facing the rear.