Zebra HW46211 User Manual

Page 4-130

110XiIIIPlus Maintenance Manual

13185L-002 Rev. A  1/24/06

Section 4

Maintenance

2. Slide one of the new spacers between the PCMCIA Option board and the MLB at 

either one of the mounting holes.

3. Insert one of the screws through the mounting hole in the wireless PCMCIA board, 

spacer, and MLB.

4. Secure the screw with one of the plastic nuts.

5. Repeat steps 2, 3, and 4 for the other mounting hole.

6. Ensure that the PCMCIA option board is seated into the MLB connectors.

7. Install the PCMCIA Option board using the hardware previously removed.

8. Refer to 

 on 

page 4-19

. Reinstall the option card, if installed, back into the 

card slot in back of the printer.

9. Refer to 

 and reinstall the electronics cover.

10. Ensure the printer is turned Off (O) and reconnect the AC power cord.

11. Turn the printer On (l).

Plastic Nuts

P24

P23

Mounting

Hole

Mounting

Hole

Mounting

Hole

Plastic

Spacers

Screws