Cisco TRC5 CTS-RMT-TRC5= User Manual
Product codes
CTS-RMT-TRC5=
29
Deployment Details
August 2012 Series
29
Step 13:
Close the SSH session on your PC.
Step 14:
From the Home screen, use the remote control to navigate to
Settings > Administrator Settings > Advanced Configuration.
The default call rate of 768 kbps is used for calls between end-
points in the same location. Bandwidth for calls between locations
is overridden by the Cisco VCS Pipe commands when calling
across the WAN.
points in the same location. Bandwidth for calls between locations
is overridden by the Cisco VCS Pipe commands when calling
across the WAN.
Tech Tip
Step 15:
From the Advanced Configuration screen, navigate to
Conference
1 > DefaultCall
, and enter the following values:
• Protocol—
Sip
• Rate—
768 kbps
Step 16:
Navigate to
Network 1 > DNS
, and enter the following values:
• Domain > Name—
cisco.local
• Server 1 > Address—
10.4.48.10
QoS is needed to put the media traffic into the low-latency
queues and the signaling into a class-based weighted fair queue
as defined in the Cisco SBA—LAN Deployment Guide. The QoS
setting gives the video packets a higher priority over non–real-
time traffic in the data queues.
queues and the signaling into a class-based weighted fair queue
as defined in the Cisco SBA—LAN Deployment Guide. The QoS
setting gives the video packets a higher priority over non–real-
time traffic in the data queues.
The Differentiated Service markings match the medianet-recom-
mended settings for interactive video traffic in Cisco SBA.
mended settings for interactive video traffic in Cisco SBA.
Tech Tip
Step 17:
Navigate to
Network1 > QoS
, and enter the following values:
• Diffserv > Audio—
34
(AF41)
• Diffserv > Data—
0
• Diffserv > Signaling—
24
(CS3)
• Diffserv > Video—
34
(AF41)
• Mode—
Diffserv