Philips Blu-ray Disc player BDP7310 BDP7310/F7 User Manual

Set up the network connection settings in order to use the 
BD-Live function with a BD-Live disc.

After you made IP address/DNS settings or when a LAN 
cable is connected, always perform the connection test to 
check if the connection is correctly made.

Connection test will start automatically and the test result 
will appear right after the connection test finishes.

• “Testing...” : The test is in progress.
• “Pass” : Connection test is successfully completed.
• “Fail” : Connection test failed. Check the connection 

settings.

 Press [OK] to go to the list of network status confirmation 
screen.

Network settings are set to the following settings initially.
(In most cases, you can connect to the Internet without 
making any changes to the default settings.)

If you want to set the network settings back to the default 
settings as above (except “BD-Live Setting”), follow the 
procedure below.

[OK].
• The unit will start the connection test automatically 

and the test result will appear right after the test 
finishes.

• After the connection test finishes, press [OK] to go to 

network status confirmation screen.

In following cases, select “Enable(Custom)” to set each 
setting as necessary.

 

  - When connection test failed with the setting of 

  - When instructed by your Internet service provider to 

make specific settings in accordance with your 
network environment.

A “Settings” A

“Advanced 

A “Others” A

Connection” A

• If the connection test passes, you can enjoy the BD-

Live functions using the Internet without making any 
extra settings.

• If the connection test fails, you may need to change 

the MAC address settings of your router. You can 
check the MAC address of this unit on “Network 
Status” screen. (refer to page 45).

***.***.***.***
***.***.***.***
***.***.***.***
***.***.***.***
***.***.***.***

IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS

then press 'OK'.

A“Settings” A

A“Others” A

Connection” A

- IP Address Setting

- Proxy Setting

• The setting of “BD-Live Setting” will not be set back 

to the default, even if you follow the procedure.

A“Settings” A

A“Others” A

Connection” A

“Enable
(Custom)”

: If your router has DHCP server 

function, select “Auto(DHCP)”.

: If your router does not have DHCP 

server function, select “Manual”.