Philips Blu-ray Disc player BDP7310 BDP7310/F7 Manual De Usuario

Los códigos de productos
BDP7310/F7
Descargar
Página de 56
43
SETUPS
Set up the network connection settings in order to use the 
BD-Live function with a BD-Live disc.
After you made IP address/DNS settings or when a LAN 
cable is connected, always perform the connection test to 
check if the connection is correctly made.
Connection test will start automatically and the test result 
will appear right after the connection test finishes.
• “Testing...” : The test is in progress.
• “Pass” : Connection test is successfully completed.
• “Fail” : Connection test failed. Check the connection 
settings.
 Press [OK] to go to the list of network status confirmation 
screen.
6) Press [OK] to go back to the previous screen, or 
] to go back to the home menu.
Network settings are set to the following settings initially.
(In most cases, you can connect to the Internet without 
making any changes to the default settings.)
If you want to set the network settings back to the default 
settings as above (except “BD-Live Setting”), follow the 
procedure below.
page.
[OK].
• The unit will start the connection test automatically 
and the test result will appear right after the test 
finishes.
• After the connection test finishes, press [OK] to go to 
network status confirmation screen.
3) Press [OK] to activate the network settings and set 
the network connection automatically. [HOME
to go back to the home menu.
In following cases, select “Enable(Custom)” to set each 
setting as necessary.
 
  - When connection test failed with the setting of 
  - When instructed by your Internet service provider to 
make specific settings in accordance with your 
network environment.
page.
4) Use [L] to highlight the desired setting, then 
Network Connection
• If the connection test passes, you can enjoy the BD-
Live functions using the Internet without making any 
extra settings.
• If the connection test fails, you may need to change 
the MAC address settings of your router. You can 
check the MAC address of this unit on “Network 
Status” scr
een. (refer to page 45).
***.***.***.***
***.***.***.***
***.***.***.***
***.***.***.***
***.***.***.***
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
then press 'OK'.
• The setting of “BD-Live Setting” will not be set back 
to the default, even if you follow the procedure.
“Enable
(Custom)”
: If your router has DHCP server 
function, select “Auto(DHCP)”.
: If your router does not have DHCP 
In
tro
duc
tio
n
Con
n
ec
ti
on
s
B
asi
c Se
tu
p
P
layb
ack
Othe
rs
F
unc
ti
o
n
 Set
u
p